No products in the basket.
Tagging Systems
Showing all 6 results
-
Tagging Systems
RF 8.25 Mhz small shop system package
This system is a single pillar system capable of detecting RF Adhesive labels at 0.8 metres either side of the aerial and R50 tags at 1.1 metres. This system requires only a 240 volt spur for installation.
Whilst full instructions are given, there may be installations that require an experienced installation engineer to install and commission this system. This can be arranged at extra cost.The package comprises the system, 500 R50 tags and pins and 1 High Strength Detacher.
SKU: 10061£1,380.00 Add to basket -
Tagging Systems
SG1 Mono 8.2 Mhz single pillar system
SG1 MONO 8.25 MHZ SINGLE PILLAR SYSTEM CLICK ON PICTURE FOR MORE DETAILS.
The system detects hard tags up to 1.2 metre either side of the aerial and will also detect adhesive labels of 5 x 5 size. The modern design of the aerial means that it has the capability to accept advertising in front of the plexi panels. The advanced digital electronics means good detection, very high reliability and very low false alarms.
The system is suitable for a single doorway or it can be part of a line of systems. For example 2 aerials can cover 4.8 metres with hard tags.
Nationwide installation/maintenance available costed extra.
SKU: 10062£1,260.00 Add to basket -
Tagging Systems
SG2 8.25 Mhz System
The SG2 8.25 mHz system is a wide aisle system that can detect 4 x 4 adhesive labels with an aerial separation of up to 1.6 metres. The system is a well tried system that has an open aerial design that would compliment any shop design.
This system should be installed by experienced personnel and this can be arranged at extra cost nationwide.
SKU: 10051£1,275.00 Add to basket -
Tagging Systems
SG2 AM 58 Khz System
The SG2AM system is a 2 aerial 58 kHz AM system that can detect tags up to 2 metres between the aerials depending upon the tag used. The aerials can accept advertising and can have people counters added as an accessory. These systems are used by many high street retailers not just in the UK but across Europe.
Installation and commissioning is achieved via laptop software and as such it is recommended that an experienced engineer installs this system. This can be arranged at extra cost.
SKU: 10045£1,860.00 Add to basket -
Tagging Systems
SG2 AM 58Khz System, Small Shop Package
The SG2AM system is a 58 kHz system that detects all AM tags on 58 kHz. This is the same frequency as ADT/Sensormatic. This system is ideal for a single doorway.
The package comprises THE SYSTEM, 500 STYLUS TAGS + pins and a DETACHER. The system detects the stylus tag at 1.2 metres either side of the aerial and the DR adhesive labels up to 0.9 metre either side.The system comes with full instructions for installation but it is recommended that installation is done by an experienced engineer. This service can be arranged at extra cost.
SKU: 10060£1,600.00 Add to basket -
Tagging Systems
SG2 AM Mono 58 Khz System
This single aerial system working on 58 kHz AM is compatible with Sensormatic and WG systems and is ideal for the small store that has a single door. The system will detect hard tags up to 1.1 metres either side of the aerial. Adhesive labels would be less at about 0.9 metres either side. The unit should be installed opposite the door hinge for optimum detection.
The design has as standard, the capability to accept printed advertising by just clipping them into the frame.
The system requires installation/commissioning via laptop s/w so it is recommended that a suitably experienced engineer installs this system. This can be arranged at extra cost.
SKU: 10044£1,450.00 Add to basket
-
Tagging Systems
RF 8.25 Mhz small shop system package
This system is a single pillar system capable of detecting RF Adhesive labels at 0.8 metres either side of the aerial and R50 tags at 1.1 metres. This system requires only a 240 volt spur for installation.
Whilst full instructions are given, there may be installations that require an experienced installation engineer to install and commission this system. This can be arranged at extra cost.The package comprises the system, 500 R50 tags and pins and 1 High Strength Detacher.
-
Tagging Systems
SG1 Mono 8.2 Mhz single pillar system
SG1 MONO 8.25 MHZ SINGLE PILLAR SYSTEM CLICK ON PICTURE FOR MORE DETAILS.
The system detects hard tags up to 1.2 metre either side of the aerial and will also detect adhesive labels of 5 x 5 size. The modern design of the aerial means that it has the capability to accept advertising in front of the plexi panels. The advanced digital electronics means good detection, very high reliability and very low false alarms.
The system is suitable for a single doorway or it can be part of a line of systems. For example 2 aerials can cover 4.8 metres with hard tags.
Nationwide installation/maintenance available costed extra.
-
Tagging Systems
SG2 8.25 Mhz System
The SG2 8.25 mHz system is a wide aisle system that can detect 4 x 4 adhesive labels with an aerial separation of up to 1.6 metres. The system is a well tried system that has an open aerial design that would compliment any shop design.
This system should be installed by experienced personnel and this can be arranged at extra cost nationwide.
-
Tagging Systems
SG2 AM 58 Khz System
The SG2AM system is a 2 aerial 58 kHz AM system that can detect tags up to 2 metres between the aerials depending upon the tag used. The aerials can accept advertising and can have people counters added as an accessory. These systems are used by many high street retailers not just in the UK but across Europe.
Installation and commissioning is achieved via laptop software and as such it is recommended that an experienced engineer installs this system. This can be arranged at extra cost.
-
Tagging Systems
SG2 AM 58Khz System, Small Shop Package
The SG2AM system is a 58 kHz system that detects all AM tags on 58 kHz. This is the same frequency as ADT/Sensormatic. This system is ideal for a single doorway.
The package comprises THE SYSTEM, 500 STYLUS TAGS + pins and a DETACHER. The system detects the stylus tag at 1.2 metres either side of the aerial and the DR adhesive labels up to 0.9 metre either side.The system comes with full instructions for installation but it is recommended that installation is done by an experienced engineer. This service can be arranged at extra cost.
-
Tagging Systems
SG2 AM Mono 58 Khz System
This single aerial system working on 58 kHz AM is compatible with Sensormatic and WG systems and is ideal for the small store that has a single door. The system will detect hard tags up to 1.1 metres either side of the aerial. Adhesive labels would be less at about 0.9 metres either side. The unit should be installed opposite the door hinge for optimum detection.
The design has as standard, the capability to accept printed advertising by just clipping them into the frame.
The system requires installation/commissioning via laptop s/w so it is recommended that a suitably experienced engineer installs this system. This can be arranged at extra cost.
-
Tagging Systems
RF 8.25 Mhz small shop system package
This system is a single pillar system capable of detecting RF Adhesive labels at 0.8 metres either side of the aerial and R50 tags at 1.1 metres. This system requires only a 240 volt spur for installation.
Whilst full instructions are given, there may be installations that require an experienced installation engineer to install and commission this system. This can be arranged at extra cost.The package comprises the system, 500 R50 tags and pins and 1 High Strength Detacher.
£1,380.00 Add to basket -
Tagging Systems
SG1 Mono 8.2 Mhz single pillar system
SG1 MONO 8.25 MHZ SINGLE PILLAR SYSTEM CLICK ON PICTURE FOR MORE DETAILS.
The system detects hard tags up to 1.2 metre either side of the aerial and will also detect adhesive labels of 5 x 5 size. The modern design of the aerial means that it has the capability to accept advertising in front of the plexi panels. The advanced digital electronics means good detection, very high reliability and very low false alarms.
The system is suitable for a single doorway or it can be part of a line of systems. For example 2 aerials can cover 4.8 metres with hard tags.
Nationwide installation/maintenance available costed extra.
£1,260.00 Add to basket -
Tagging Systems
SG2 8.25 Mhz System
The SG2 8.25 mHz system is a wide aisle system that can detect 4 x 4 adhesive labels with an aerial separation of up to 1.6 metres. The system is a well tried system that has an open aerial design that would compliment any shop design.
This system should be installed by experienced personnel and this can be arranged at extra cost nationwide.
£1,275.00 Add to basket -
Tagging Systems
SG2 AM 58 Khz System
The SG2AM system is a 2 aerial 58 kHz AM system that can detect tags up to 2 metres between the aerials depending upon the tag used. The aerials can accept advertising and can have people counters added as an accessory. These systems are used by many high street retailers not just in the UK but across Europe.
Installation and commissioning is achieved via laptop software and as such it is recommended that an experienced engineer installs this system. This can be arranged at extra cost.
£1,860.00 Add to basket -
Tagging Systems
SG2 AM 58Khz System, Small Shop Package
The SG2AM system is a 58 kHz system that detects all AM tags on 58 kHz. This is the same frequency as ADT/Sensormatic. This system is ideal for a single doorway.
The package comprises THE SYSTEM, 500 STYLUS TAGS + pins and a DETACHER. The system detects the stylus tag at 1.2 metres either side of the aerial and the DR adhesive labels up to 0.9 metre either side.The system comes with full instructions for installation but it is recommended that installation is done by an experienced engineer. This service can be arranged at extra cost.
£1,600.00 Add to basket -
Tagging Systems
SG2 AM Mono 58 Khz System
This single aerial system working on 58 kHz AM is compatible with Sensormatic and WG systems and is ideal for the small store that has a single door. The system will detect hard tags up to 1.1 metres either side of the aerial. Adhesive labels would be less at about 0.9 metres either side. The unit should be installed opposite the door hinge for optimum detection.
The design has as standard, the capability to accept printed advertising by just clipping them into the frame.
The system requires installation/commissioning via laptop s/w so it is recommended that a suitably experienced engineer installs this system. This can be arranged at extra cost.
£1,450.00 Add to basket